The easy to use FTP module uploads your number plate images to a secure storage area in the cloud either your own website or a 3rd party service, you can decide. It’s an ideal way to gain off-site access to the captured licence plate information.
This is designed for use with the RoboPlate Standard (code: SOFT1030) or Lite (SOFT1034) 1-Ch versions.
RoboPlate FTP module is a great bolt-on for multisite operations where you may wish a central office to manage the results database of various sites across the country for example managing a logistics operation with multiple depots.
The FTP module allows you to set the time intervals between each upload. Only images captured since the last upload will be uploaded so it’s easy to change the interval depending on the site traffic. For sites which only capture a hand full of images a day it might be more practical to upload captures every half an hour. However, on a site which has a high volume of traffic the interval could be set to every 2 minutes so you’re not trying to upload a large number of files in one go.
As the images are uploaded to a secure location online anyone with access can view the images from anywhere in the world. The captures are named in a handy Date-Time-Plate format too so it’s easy to keep track of comings and goings.
Uploading your image captures to an off-site server or cloud storage also creates a secure backup of all your results. If the local server or hard drive where the images are stored fails you can be safe in the knowledge that your previously uploaded results are safe and secure.
RoboPlate software provides the user with everything they need to get up and running with ANPR. Simply set up a suitable CCTV camera to capture your number plate on your new or existing DVR/NVR, enter the required connection information in the RoboPlate software and you’ll be capturing a list of number plates in minutes.
As use of RoboPlate continues, the database of number plates builds up. As each plate result is stored with a date and time stamp too, it can be interrogated to find any emerging patterns of behaviour such as a suspect vehicle in the car park late at night.
RoboPlate LITE and STANDARD both have the ability to log the plates recognised by a camera and compare them against a white list for a subsequent action to follow. For example a fleet vehicle registration match to a white list might trigger a relay to open a security barrier to an unloading bay.
STANDARD has the added benefit over the LITE version of “Group Membership” a feature that’s ideal for larger businesses. With Group membership you are able to limit the trigger action to within a predetermined schedule. For example you might trigger your car park gate to allow access to staff Mon-Fri 8am to 8pm, whilst Managers can access 8am-8pm including weekends but a security patrol vehicle might have access 24/7 without interruption.
A date range field can also be added to this membership to control access during holiday periods or to control access by temporary staff or contractors. Groups on a single site might include:
Key Holders Night - Everyday 8pm-8am triggers an Action Group to open main entrance gate, switch on a photocell controlled courtesy light then email a monitoring centre.
Key Holders Day - Everyday 24/7 triggers an Action Group to open main entrance gate, switch on a photocell controlled courtesy light then nothing.
Security Patrol - Everyday 24/7 triggers an Action Group to open main entrance gate, switch on a photocell controlled courtesy light then email the Operations Manager so they are aware the patrol has taken place.
Management - Everyday 8am-8pm triggers an Action Group to open main entrance gate, switch on a photocell controlled courtesy light then nothing.
Staff - Monday-Friday between 8am and 6pm all year round triggers an Action Group to open the main gate entrance.
RoboPlate LITE and Standard are easy to integrate into a network using the add-on LAN Relay module to give control over network security devices such as Access Control equipment like the ZAP range. For example a match with a vehicle white list of a staff number plate could provide double verification of who they are before they try and access the building.
A handy delay feature of up to 99 seconds is useful if you are capturing a vehicle prior to it reaching a barrier or gate so you can delay its opening.
Both RoboPlate LITE and Standard include 3 modules:
Capture – where it captures the image, deciphers and logs the vehicle licence plate
Configure – where subsequent actions can be set up such as Pop-Ups and Email sending and more meaningful data can be added to the plate record.
Search – where the operator can search for occurrences of a plate (in part or full) to filter when and where it has been detected.
Additional modules are available to allow extra PC users to interrogate the results captured by the main program; these include both Configure and Search functions. An example might be where the main RoboPlate copy is run by the IT department but extra modules are run by the HR department to monitor staff attendance.
|Operating System||Microsoft Windows 7, 8, 8.1 or 10 both 32bit and 64bit supported*|
|Processor||Intel i3 minimum|
|RAM||32Bit Windows: 4GB / 64Bit Windows: 8GB|
|Graphics Card||Dedicated card recommended|
|Screen Resolution||1920 x 1080 required|
|Hard Disk||Installation requires approximately 8Mb|
|Internet Connection||Internet connection is required for registration and activation purposes initially and subsequently for support purposes thereafter. An Internet connection is not required for normal day-to-day program operation.|
*Windows XP, Vista and server editions are not supported.
|Licences||1 per PC|
|Support Period||6 Months ticket based support*|
*Downloads within the support period are available via your personalised Control Panel.
That’s easy, the FTP module is a simple easy to use add-on for your RoboPlate ANPR system. The FTP module automatically uploads your image captures to your server or cloud storage at set intervals between 1 and 30 minutes.
We also have a dual channel FTP module available (SOFT1042) for use with dual channel RoboPlate systems.
Ideally the FTP module would be installed on the PC which is running the RoboPlate software to avoid any complications. The FTP software uses only a tiny amount of you computers resources and runs silently in the background.
If for whatever reason you do require the FTP module to installed on another PC our support team can help you with this. Keep in mind the PC would need to be on the same network as the PC which runs the RoboPlate software and must have read access to the image capture storage folder.
At the time of writing RoboPlate only supports Alien branded HD-TVI or HD-SDI DVRs with a corresponding HD camera. IP cameras are currently not supported from these devices. Additional information will be made available online at RoboPlate.com in due course.
A regular HD CCTV camera is all RoboPlate ANPR software requires but good lighting and appropriate camera settings will all help to improve image quality and therefore detection and recognition rates. A simple test is that if a number plate cannot be read by the naked eye then it is unlikely to be captured by a standard CCTV camera which means that RoboPlate will not be able to read it either.
RoboPlate can process images captured at 1280x720 or 1920x1080, for DVRs, this should be the recording resolution.
Not really older technology simply doesn’t have the detail required. An image resolution of 4CIF, 705x576 or below does not provide sufficient pixel density to deliver a successful result. It would need to be a very closely cropped view of the plate for 4CIF to make a reading so in reality an entry level HD resolution of 1280x720 is required. You could say that investing in ANPR software is a little wasted if you had not invested in a HD CCTV system first.
Anything that prevents a clear view of a vehicle registration plate will hinder the program’s ability to obtain a successful result. This includes rain, fog, snow and other obstructions. You will need to keep the lens of your camera clean and free from cobwebs too.
RoboPlate uses OCR / shape matching technology to identify characters by their outline. It does not look for or match to specific fonts. It expects characters to be regular upright shapes in keeping with license plate guidelines rather than fancy/italic style. Some owners of ‘private plates’ in the UK re-position mounting screws or deliberately change a character’s shape to make their plate more desirable, in doing so, they will make recognition harder.
RoboPlate captures about two frames per second directly from the DVR so it is intended for slow moving traffic that stays in the field of view for a reasonable amount of time to achieve this. It is good to bear this in mind at the time of installation as you can try to position your camera facing oncoming vehicles head on where they may naturally slow down or stop such as at a gate way, barrier or narrowing of the road.
Installing the application will require approximately 85Mb initially. As images are captured the data directories will grow by about 350KB per recognition.
Yes RoboPlate can be easily integrated into Immix.
Many factors affect recognition such as partially obscured or background object or signage within an image that can appear to be legitimate characters detectable by the OCR engine. Palisade fencing caught at the wrong angle can cause it, but anything that appears to be a character or impacts on a character or its outline can produce a result.
Adding RoboPlate can transform the versatility of your system by comparing data against whitelists of approved staff or visitors to help monitor and even manage physical access to a site. The ability to interrogate a log also helps you to detect any visitor patterns.
RoboPlate LAN Relay