Page 12 - DoorKnox-Manual

VDP103 - Secure Access Door Entry Camera

Creating New Key Codes Pairing Key Fobs & Key Cards

Up to 40 key codes can be saved to each VDP103 door A combination of up to 40 key fobs and cards can be
camera. Creating new key codes is easy as described paired to a single VDP103. Each key fob/card however
in the steps below: can be paired to multiple door cameras so the same
key fob/card can be used to open multiple doors.
1 Press ‘ENTER’ on the rear of the camera and you You will need to pair the key fob/card to each door
will hear a beep. entry unit separately. To pair a key fob/card to a
2 Enter your new key code followed by the ‘#’ key. VDP103 just follow the simple steps below:
You will hear a long beep confirming the new
key code has been created. 1 Press ‘ENTER’ on the rear of the camera and you
will hear a beep.
Note Key codes must be between 4 and 8 characters 2 Swipe the key fob across the keypad. You will hear
a long beep confirming the key fob had been
* long and can not include the ‘ ’ or ‘#’ key. paired successfully.

If the maximum 8 characters are entered you
will hear a long beep confirming the key code
has been created so you don’t need to press
the ‘#’ key.

12 Find out more at www.DoorKnox.com