Page 39 - DoorKnox-Manual
P. 39
Using The Menu System
Alarms Menu connected to camera 2. You can set it to NO (Normally
Open), NC (Normally Closed) or disable it if there is no
In the Alarms menu you can configure everything alarm connected.
related to the auxiliary cameras and alarms used for CAM1 - Enable or disable auxiliary camera 1. When
intruder detection. disabled the camera output can be activated by an alarm
CAM1 Sensor Type - Set the alarm type for the trigger and CAM1 will not show when cycling through available
connected to camera 1. You can set it to NO (Normally inputs.
Open), NC (Normally Closed) or disable it if there is no CAM2 - Enable or disable auxiliary camera 2. When
alarm connected. disabled the camera output can be activated by an alarm
CAM2 Sensor Type - Set the alarm type for the trigger and CAM2 will not show when cycling through available
inputs.
CAM1 Ring Time - Choose the duration of time the alarm
tone will be played for on an alarm trigger for camera 1.
The ring time can be set between 0 and 30 seconds.
CAM2 Ring Time - Choose the duration of time the alarm
tone will be played for on an alarm trigger for camera 2.
The ring time can be set between 0 and 30 seconds.
Alarm Record - Determines what is captured when an
alarm is triggered. Snapshot will capture a single image
where as Record will capture a video recording up to 2
minutes long.
Find out more at www.DoorKnox.com 39
